Bow Claw Clip in Layered Acetate | Pastel Two-Tone OEM

This clip is assembled, not cut. A pale pink base carries a separate powder-blue bow layered on top, with a fine white dashed line following the bow’s edge like stitching on fabric. Four elements, three colours, two planes of depth — in a product most factories deliver as one flat shape.

How a Multi-Layer Acetate Piece Is Made

Each element is cut from its own sheet, edge-polished separately, then registered and bonded to the piece beneath it. The dashed stitch line is a fine engraved channel filled with white — not printed, which is why it survives being pulled through hair.

The tolerance is what makes it difficult. A bow sitting a millimetre off-centre is visible immediately, so every layer is aligned by hand against a jig. It is closer to marquetry than to normal accessory production, and it is the reason a piece like this carries a fashion-jewellery price rather than a hair-accessory one.

Designed to Read as Fabric

The whole design is a trompe-l’oeil: hard acetate pretending to be a ribbon bow tied over a hair clip. The stitch detailing, the soft matte-adjacent finish on the pink, and the way the bow tails fall past the clip body all push that idea. Customers pick it up expecting textile and find something rigid and substantial, which is exactly the moment that converts.

It suits coquette, balletcore and bridal-adjacent positioning, and it photographs extremely well — the layered depth reads on camera in a way a flat printed pattern never does.

Colourways Are the Easy Part

Because the elements are separate sheets, the colour combination is fully specifiable without touching the tooling. The stock version is blush pink with powder blue; the same construction runs in cream and sage, black and ivory, or a tonal single-colour version where only the stitch line contrasts.

Sets work particularly well here — the gallery shows the bow clip boxed alongside a companion piece, which is how most brands sell it. Rigid gift boxing is quoted alongside the clip and produced at the same time.

What to Confirm Before Bulk

Two things on a layered piece, and both need a physical sample:

• Bond line visibility. Check the join between layers under daylight, not office light.
• Bow projection. The bow stands proud of the clip body, so confirm it does not catch when the clip is opened fully.

We produce a pre-production sample for approval on every layered design rather than going straight to bulk. For simpler single-sheet shapes, see the rest of our claw clip range; for a matched collection, the same sheets cut into barrettes and headbands. Send a reference to our OEM team for feasibility feedback within 24 hours.