Boar bristle brushes are one of the easiest hair tools for a new brand to sell on story: a natural bristle, a wooden or bamboo body, and a reason to talk about shine and gentle brushing. They are also one of the easiest to get wrong. Two brushes can both be sold as “boar bristle” while one is 100% boar, one is a boar and nylon mix, and one is mostly nylon with a little boar for the label.

This guide is for brands and retailers planning their own boar bristle line. It explains the three bristle setups and which hair each one suits, how the brushes are made, what to put in your brief, how to check that “100% boar” really is boar, and what minimums, sample times and lead times to plan for.

100% boar, boar and nylon, or boar and pins?

The bristle setup decides who the brush is for, so choose it before the body shape or the finish. Most boar bristle ranges use one of these three:

Pick the setup by hair type, then the body

100% boar bristleOnly natural bristle in every tuft
  • Soft, dense and gentle on the scalp
  • Picks up scalp oil and carries it along the hair for shine
  • Too soft to get through thick or curly hair on its own
Best for: fine to medium hair, beards, finishing
Boar and nylon mixLonger nylon bristle set inside each boar tuft
  • The nylon reaches in and detangles
  • The boar follows and smooths
  • The usual choice when one brush has to suit most customers
Best for: medium to thick hair, everyday use
Boar and pinsBoar tufts alternating with ball-tipped pins
  • Pins do the detangling, boar polishes the surface
  • Feels firmer than a boar and nylon mix
  • Works well on a cushion (pneumatic) brush
Best for: thick or long hair that still needs shine
Close-up of three brush cushions side by side: pure boar bristle tufts, boar tufts with longer black nylon bristles in the centre, and boar tufts alternating with ball-tipped pins
Left to right: 100% boar bristle, boar and nylon mix, boar bristle with ball-tipped pins.

If you are building a small range, a common pattern is one 100% boar brush for fine hair or finishing, and one boar and nylon brush for everyone else. For how these compare with all-nylon, wooden pin and steel pin brushes, see our guide to hair brush bristle types.

SetupHow it feelsHair it suitsExamples in our range
100% boarSoft, dense, gentleFine to medium hair, beardsWooden beard brush, wooden round brush
Boar and nylonMedium, detangles as it smoothsMedium to thick hairBamboo paddle brush, acetate cushion brush
Boar and pinsFirmer, pins reach the scalpThick or long hairAcetate dual bristle cushion brush

How a boar bristle brush is made

Knowing the steps helps you read a quote, because every step is a place where cost or quality changes. A boar bristle brush is built in this order:

From body to box

  1. BodyWood or bamboo is cut and shaped, acetate is cut from sheet. Round brush barrels are turned.
  2. FinishThe body is sanded, then oiled, lacquered or polished. This is where colour and gloss are set.
  3. Cushion or baseCushion brushes get a rubber pad with a small air vent; flat brushes are drilled straight into the body.
  4. TuftingA tufting machine folds a bundle of bristle and fixes it into each hole, row by row.
  5. TrimmingThe tufts are trimmed so the bristle field is level, or shaped where the design asks for it.
  6. Logo and packingLaser engraving, hot foil or printing on the handle, then inspection and retail packing.

Tuft density, bristle length and how firmly the tufts are fixed affect how the brush feels and whether it sheds in use. Tufting takes place in Liaobu, Dongguan, using 35 tufting machines. Brush designs can use 100% boar bristle, mixed boar and nylon, or boar bristle paired with pins.

Choosing the body: wood, bamboo or acetate

Boar bristle sits naturally with plant-based bodies, and the body is what your customer sees first on the shelf.

BodyLook and feelGood to know
Beech and other hardwoodsWarm, classic, can be oiled, lacquered or stained blackThe most flexible for shape and finish; turned round brushes are usually wood
BambooLight, striped with visible node linesLaminated from strips, so it suits flat paddle and oval shapes
Cellulose acetateTortoiseshell, marble or solid colours with a deep polishPremium look; pattern runs through the material rather than being printed
White shelves holding rows of wooden and bamboo hair brushes in different shapes, many with natural boar bristle
Sample shelves of wooden and bamboo brushes, many of them boar bristle.

Our hair brush range and beard brushes show the body shapes that are already in production. Starting from one of these is quicker than developing a new body.

What to put in your brief

A clear brief gets you a comparable quote and a sample that is close the first time. A custom sample is made once everything is agreed, and any change after sampling means a new sample, so it pays to settle these points before you ask:

Send these with your enquiry

  • Bristle setup: 100% boar, boar and nylon, or boar and pins
  • Feel: soft, medium or firm, ideally with a reference brush
  • Body: material, shape and size, or an existing style to start from
  • Finish and colour: natural, oiled, lacquered, black or an acetate pattern
  • Logo: artwork, position and method (laser, hot foil, printing)
  • Packaging: pouch, box or backing card, and any barcode
  • Quantity: per design and per colour
  • Target market: where the brush will be sold

Bristle length and stiffness are easiest to agree by sending or naming a reference brush, then confirming them on the sample. Our guide on how to brief a factory is written for hair clips, but the same approach to artwork and colours applies to brushes.

How to check that “100% boar” is really boar

Nylon is cheaper and more uniform than natural bristle, so a mix can be sold as pure boar, or a mostly nylon brush can be sold as boar and nylon. These checks take a few minutes and need no lab:

Check the sample before you approve it

  1. Look at the tipsNatural bristle tapers to a fine tip and the hairs vary slightly in thickness. Cut nylon ends are blunt and every strand is the same.Red flag: every bristle identical, like fishing line
  2. Look at the colourNatural bristle varies from light to dark within a tuft unless it has been dyed. Nylon colour is perfectly even.Red flag: a “natural” brush with no variation at all
  3. Burn one loose bristleBoar bristle singes and smells of burnt hair, leaving a little ash. Nylon melts into a hard bead and smells of plastic.Red flag: a melted bead on a “100% boar” bristle
  4. Count the long bristlesIn a boar and nylon mix the nylon should be a minority set inside the boar tuft. Pull one tuft apart and look.Red flag: more nylon than boar in each tuft
  5. Pull a tuftGrip a single tuft and pull firmly. It should stay fixed, and the brush should not shed bristle when you brush through hair.Red flag: loose bristle on the table after a few strokes

Do the burn test on a single bristle pulled from a spare sample, outdoors or over a sink, never on a sample you need to return. The approved sample then becomes the standard the bulk order is inspected against, so check it carefully before you sign it off.

MOQ, samples and lead times

These are the numbers to plan a boar bristle line around. Exact timing depends on the style, the materials and the production schedule at the time of order.

ItemWhat to plan for
Minimum order1,000 pcs per design, and each colour needs to reach the minimum
Existing style as a sampleShipped within about 3 days; regular styles are free, you cover the courier
Custom boar bristle sampleAbout 25–35 days, depending on the style
Bulk productionAbout 40–60 days for boar bristle brushes
Price breaksAt 5,000 pcs the unit price is usually around 10% lower than at 1,000 pcs

Boar bristle brushes take longer than plain wooden brushes at both the sample and the bulk stage, so build that into your launch date. Our guides to sampling costs and approval and MOQ explain how sample fees and minimums work in more detail.

The boar bristle used is legally sourced. If your customers want an animal-free brush, the same bodies can be tufted with nylon bristle instead, so you can offer both versions under one design.

Black-finished wooden palm beard brush seen from above, showing an oval field of boar bristle
Wooden beard brush, 100% boar
Three wooden round blow-dry brushes standing upright in three barrel diameters
Wooden round brush, 100% boar
Bamboo paddle hair brush with boar and nylon bristles
Bamboo paddle, boar and nylon
Flamed tortoiseshell acetate oval cushion brush with boar and nylon bristles
Acetate cushion, boar and nylon

Planning a boar bristle range? Send us your reference brushes or sketches with the setup and quantity you have in mind, and we will suggest the closest existing body and bristle setup to start from.

Frequently asked questions

Is a boar and nylon brush worse than 100% boar?

No, it suits different hair. 100% boar is softer and better for fine hair and finishing. A boar and nylon mix detangles thicker hair that pure boar cannot get through, which is why it is the more common choice for an everyday brush.

Which boar bristle brush is best for thick hair?

A boar and nylon mix, or boar bristle with ball-tipped pins. The longer nylon or the pins reach through thick hair to detangle, and the boar smooths the surface.

How can I tell if a brush is 100% boar bristle?

Look for tapered tips and natural colour variation, then burn a single loose bristle: boar singes and smells like burnt hair, while nylon melts into a bead. A tuft that is all one thickness and colour is likely nylon.

What is the minimum order for a private label boar bristle brush?

1,000 pieces per design, and each colour has to reach the minimum. Starting from an existing body and adding your logo is the quickest route.

How long does a custom boar bristle brush take?

A custom sample takes about 25–35 days, and bulk production about 40–60 days, depending on the style, materials and production schedule.

Can the same brush be made without animal bristle?

Yes. The same bodies can be tufted with nylon bristle, so a brand can offer a boar version and an animal-free version of one design.